PDA

View Full Version : any ideas?


TURBINE GUY
03-01-2013, 03:02 PM
UNUSED, UNFINISHED WOOD PROP, Markings, are a 2 over D5000 on one side of hub and a 1 over 2265 and what looks like an S 53 under that on the other side of hub , ORIG. L. APPROX. 112 3/4", NO BOLT HOLES, SHAFT HOLE 2 5/8". one tip missing the other delamanating, no leading edge protection. I'm green as you know what at this, so I ask for forgiveness ahead. Any ideas?
Thanks Ron

Dave
03-01-2013, 08:59 PM
Do you have a photo of the entire prop?

TURBINE GUY
03-07-2013, 02:52 PM
sorry i took so long to get back to you here is a photo hanging on the wall. its the 3rd from bottom.

Dave
03-07-2013, 05:53 PM
What's up with the tape on the blades, and the fact that the blades look asymmetrical?

TURBINE GUY
03-08-2013, 01:08 PM
One tip is missing, the other is delamanting. Owner put the tape on trying to save it, makes me think it was a reject, since never being finished. i'm just trying to identify the make. I know this is not the right place for this, sorry for that.
Ron

Dave
03-08-2013, 01:57 PM
Typically, the only sure way to identify make is with manufacturer's decals, although a few also stamped the company name on the wood.

TURBINE GUY
03-11-2013, 04:37 PM
Dave, thanks for the help, guess it will have to remain a mystery.
thanks Ron