PDA

View Full Version : prop


p8702
02-08-2012, 12:14 PM
first is this propeller had it for 20 years ...stored...dont use it dont know its history...102 1/4 inches long here is some photos...help what is it worth and who would want it thank you.. the chart from woddenpropellers for the hub looks like a curtiss ox5....
thanks.. gtsimpson69@gmail.com

Dave
02-08-2012, 12:25 PM
Any other numbers stamped on it? That's not enough to identify or even guess a relative value.

D.Hicklin
02-08-2012, 08:11 PM
When you get time, can you please post some more pictures that show the full span front and back to really get some detail of this propeller. It would be greatly appreciated.

Sincerely,
Dennis Hicklin
Seattle Washington

p8702
03-04-2012, 10:33 AM
these are the only other pics i got ...i measure the steel hub and came up with that engine..no other numbers visable than what i see on the front..thanx

D.Hicklin
03-04-2012, 12:30 PM
Thanks for the additional pictures, I was curious about the asking price and also the location of where it is in regards to calculating shipping cost.

Sincerely,
Dennis Hicklin
Seattle Washington

Dave
03-04-2012, 02:09 PM
...i measure the steel hub and came up with that engine..no other numbers visable than what i see on the front..thanx

It may be an OX 5, but somehow the dimensions look a little larger than that to me.

If you measure across the hub from the edge of one hole to the corresponding edge of the other (shown in red), that distance should be exactly 5 1/4 inches. If not, it's for a different engine. If it is, it's PROBABLY for an OX 5, but even then you can't be certain.

http://woodenpropeller.com/forumvB/attachment.php?attachmentid=2538&d=1330884534